Sienna AWD V6-3.3L (3MZ-FE) (2004)
4. REMOVE FRONT AXLE LH HUB BOLT
a. Using SST and a screwdriver or an equivalent to hold the front axle hub, remove the front axle LH hub bolt.
SST 09628-1001
5. INSTALL FRONT AXLE LH HUB BOLT
a. Install a washer and nut to a new front axle LH hub bolt as shown in the illustration.
b. Using a screwdriver to hold the front axle hub, install the hub bolt by torquing the nut.
6. INSTALL FRONT DISC
7. INSTALL FRONT DISC BRAKE CALIPER ASSY LH
8. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)