toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABOUT US
Shift Solenoid, A/T > < Engine Controls - ECU Reprogramming Procedure|Page 4628

Sienna AWD V6-3.3L (3MZ-FE) (2004)

  • Transmission and Drivetrain
  • Actuators and Solenoids - Transmission and Drivetrain
  • Actuators and Solenoids - A/T
  • Shift Interlock Solenoid
  • Component Information
  • Testing and Inspection

Page 1
background image

Shift Interlock Solenoid: Testing and Inspection

KEY INTER LOCK SOLENOID

INSPECTION 

1. INSPECT SOLENOID, KEY INTER LOCK

a. Disconnect the solenoid connector.
b. Connect KLS+ (4) terminal to the batteries' positive (+) terminal, and KLS- (3) terminal to the battery negative (A terminal, and apply about

12V between KLS+ - KLS- terminals.

c. Check that operation noise can be heard from the solenoid.

If the solenoid does not operate, replace the solenoid.

  • Transmission and Drivetrain
  • Actuators and Solenoids - Transmission and Drivetrain
  • Actuators and Solenoids - A/T
  • Shift Interlock Solenoid
  • Component Information
  • Testing and Inspection

Shift Solenoid, A/T > < Engine Controls - ECU Reprogramming Procedure|Page 4628