Sienna AWD V6-3.3L (3MZ-FE) (2004)
/Page-910002.png)
20. REMOVE TRANSAXLE HOUSING OIL SEAL
a. Using a screw driver with vinyl tape wound around its tip, remove the oil seal.
NOTICE: Be careful not to damage the housing.
21. INSTALL TRANSAXLE HOUSING OIL SEAL
a. Using SST and a hammer, drive in a new oil seal.
Oil seal drive in depth: 6.0 ± 0.5 mm (0.236 ± 0.020 inch)
b. Coat the lip of the oil seal with MP grease.
SST 09649-17010, 09950-70010 (09951-07200)
22. INSTALL TRANSFER ASSY
23. INSTALL AUTOMATIC TRANSMISSION W/TRANSFER
24. INSTALL TRANSFER STIFFENER PLATE RH
25. INSTALL FRONT DRIVE SHAFT ASSY RH
26. INSTALL FRONT DRIVE SHAFT ASSY LH
27. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
SST 09670-00010
