Sienna AWD V6-3.3L (3MZ-FE) (2004)
Shift Cable: Customer Interest
A/T - Gear Selection Becomes Progressively Harder
TRANSMISSION & CLUTCH
TC010-04
Title:
TRANSMISSION SHIFT CABLE
Models:
'04 - '05 Sienna
December 16, 2004
Introduction
The transmission shifter may become progressively difficult to move on some 2004 - 2005 model year Sienna vehicles. The cable has been modified to
correct this condition.
Applicable Vehicles
^
2004 - 2005 model year Sienna vehicles produced BEFORE the Production Change Effective VINs shown below.
Production Change Information
Parts Information
Repair Procedure
1.
Confirm abnormal shifter resistance exists by moving the transmission gear selector between the gear ranges.
2.
Replace the transmission control cable assembly by referring to the Technical Information System (TIS) for the applicable model year Sienna
Repair Manual: Automatic Transmission / Trans: Transmission Control Cable Assy (ATM).
3.
Reset power accessory functions per TSB No. EL009-04, "Power Window/Roof Initialization Procedures."
Warranty Information
Applicable Warranty*:
This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from
the vehicle's in-service date.
* Warranty application is limited to correction of a problem based upon a customer's specific complaint.