Sienna AWD V6-3.3L (3MZ-FE) (2004)
Shift Solenoid: Testing and Inspection
SHIFT LOCK SOLENOID
INSPECTION
1. INSPECT SHIFT LOCK SOLENOID
a. Disconnect the solenoid connector.
b. Connect SLL+ (2) terminal to the batteries' positive (+) terminal, and SLS- (1) terminal to the battery negative (A terminal, and apply about 12
V between SLL+ - SLS- terminals.
c. Check that operation noise can be heard from the solenoid.
If the solenoid does not operate, replace the solenoid.