Sienna AWD V6-3.3L (3MZ-FE) (2004)
9. REMOVE REAR DRIVE PINION FRONT TAPERED ROLLER BEARING
a. Using SST, remove the front bearing.
SST 09556-22010
10. REMOVE REAR DIFFERENTIAL DRIVE PINION BEARING SPACER
11. INSTALL REAR DIFFERENTIAL DRIVE PINION BEARING SPACER
a. Install a new bearing spacer.
12. INSTALL REAR DRIVE PINION FRONT TAPERED ROLLER BEARING
13. INSTALL REAR DIFFERENTIAL DRIVE PINION OIL SLINGER
a. Install the oil slinger, as shown in the illustration.
14. INSTALL REAR DIFFERENTIAL CARRIER OIL SEAL
a. Using SST and a hammer, install a new oil seal.
Oil seal drive in depth: 2.0 ± 0.3 mm (0.079 ± 0.012 inch)
b. Apply MP grease to the oil seal lip.
09554-22010
SST 09554-22010
15. INSTALL REAR DRIVE PINION COMPANION FLANGE SUB-ASSY REAR
a. Using SST, install the companion flange on the shaft.
b. Coat the threads of a new nut with hypoid gear oil LSD.
SST 09950-30012 (09951-03010, 09953-03010, 09954-03010, 09955-03030, 09956-03020)