Sienna AWD V6-3.3L (3MZ-FE) (2004)
Constant Velocity Joint Boot: Service and Repair
Overhaul - Rear Drive Shaft (4WD)
REAR DRIVE SHAFT (4WD)
OVERHAUL
1. REMOVE REAR WHEEL
2. REMOVE EXHAUST PIPE ASSY TAIL
3. REMOVE SPEED SENSOR REAR LH
a. Remove the bolt and ABS speed sensor from the axle carrier.
NOTICE:
^
Be careful not to damage the speed sensor.
^
Prevent foreign matter from attaching to the speed sensor.