Sienna AWD V6-3.3L (3MZ-FE) (2004)
C.
Apply MP grease No.2 thinly to area A as shown in the illustration.
HINT:
Apply MP grease No.2 to prevent the oil seal lip from rolling back.
D.
Insert the SST into the transfer RH bearing retainer sub-assembly.
^
SST P/N 09387-00090
NOTE:
Insert the SST straight in order NOT to damage the oil seal.
E.
With the SST and the transfer RH bearing sub-assembly in close contact, install the transfer RH bearing retainer sub-assembly together with
the SST into the transfer case.
NOTE:
^
Avoid interference between the case and the retainer and between the SST and the transfer ring gear mounting case.
^
Carefully check the retainer's 0-ring for damage and incorrect fitting.