Sienna AWD V6-3.3L (3MZ-FE) (2004)
f.
Using a screwdriver, pry out the lock plate.
g. Remove the lock nut and lock plate.
h. Remove the 2 bolts and pull out the park/neutral position switch.
9. INSTALL PARK/NEUTRAL POSITION SWITCH ASSY
a. Install the park/neutral position switch to the manual valve shaft.
b. Temporarily install the 2 bolts.
c. Place the lock plate and tighten the nut.
Torque: 6.9 Nm (70 kgf-cm, 61 inch lbs.)
d. Temporarily install the control shaft lever.