Sienna AWD V6-3.3L (3MZ-FE) (2004)
D.
Apply new double-sided tape to the moulding, as shown in the illustration.
Dimensions
E.
Using a heat lamp, heat the vehicle body and moulding.
Heating temperature
NOTE:
Do not heat the moulding excessively.
F.
Remove the peeling paper from the face of the moulding face.
HINT:
Be careful that dirt or foreign objects do not stick to the adhesive part when removing the peeling paper.
G.
Engage the 2 claws and install the moulding with the screw.
NOTE:
Do not apply excessive force onto the moulding, but steady pressure with your thumbs.