Sienna AWD V6-3.3L (3MZ-FE) (2004)
1.
Remove the rear wiper arm.
A.
Remove the rear wiper arm head cap from the rear wiper arm.
B.
Remove the nut and the rear wiper arm.
2.
Install the new rear wiper arm.
A.
Clean the rear wiper pivot serration with a brush.
B.
Stop the rear wiper motor assembly to the automatic stop position. Install the rear wiper arm to the position as shown in the illustration.
Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)
C.
Install the rear wiper arm head cap.