Sienna AWD V6-3.5L (2GR-FE) (2007)
3. REMOVE BACK DOOR SIDE GARNISH RH
4. REMOVE BACK DOOR PULL STRAP
5. REMOVE BACK DOOR TRIM BOARD ASSEMBLY
6. REMOVE BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE
7. REMOVE TELEVISION CAMERA ASSEMBLY
a. Release the 2 claw fittings and remove the television camera assembly.
INSTALLATION
1. INSTALL TELEVISION CAMERA ASSEMBLY
2. INSTALL BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE
3. INSTALL BACK DOOR TRIM BOARD ASSEMBLY
4. INSTALL BACK DOOR PULL STRAP
5. INSTALL BACK DOOR SIDE GARNISH RH
6. INSTALL BACK DOOR SIDE GARNISH LH
7. INSTALL BACK DOOR GARNISH CENTER