Sienna AWD V6-3.5L (2GR-FE) (2007)
6. REMOVE NO.1 SPEAKER ASSEMBLY WITH BOX
a. Remove the 2 screws and No. 1 speaker assembly with box.
INSTALLATION
1. INSTALL NO.1. SPEAKER ASSEMBLY WITH BOX
a. Install the No. 1 speaker assembly with box with the 2 screws.
NOTE: Tighten the screws in order shown in the illustration to install the No. 1 speaker assembly with box.
2. INSTALL QUARTER TRIM FRONT PANEL ASSEMBLY
3. INSTALL BACK DOOR SCUFF PLATE
4. INSTALL BACK DOOR WEATHERSTRIP
5. INSTALL REAR DOOR WEATHERSTRIP
6. INSTALL REAR DOOR SCUFF PLATE