toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Front No. 1 Speaker|Page 7537 > < Front No. 1 Speaker|Page 7535
Page 3
background image

3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
4. REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY
5. REMOVE FRONT DOOR TRIM BOARD SUBASSEMBLY

6. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY

a. Disconnect the connector.
b. Remove the 4 screws and front No. 1 speaker assembly.

INSTALLATION 

1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

a. Install the front No. 1 speaker assembly with the 4 screws.

NOTE:  Tighten the screws in order shown in the illustration to install the front No. 1 speaker assembly.

b. Connect the connector.

2. INSTALL FRONT DOOR TRIM BOARD SUBASSEMBLY
3. INSTALL FRONT DOOR ARMREST BASE PANEL ASSEMBLY
4. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
5. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG
6. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH

Front No. 2 Speaker

Front No. 1 Speaker|Page 7537 > < Front No. 1 Speaker|Page 7535