Sienna AWD V6-3.5L (2GR-FE) (2007)
/Page-1603002.png)
OK: The cone paper of the speaker is not torn.
If the result is not as specified, replace the No.1 speaker with box.
No. 2 Speaker With Box
ON-VEHICLE INSPECTION
1. INSPECT NO.2 SPEAKER WITH BOX
HINT: Remove interior parts so that the No.2 speaker with box can be seen.
a. Check the speaker installation.
OK: The speaker is securely installed.
If the result is not as specified, reinstall the No.2 speaker with box.
b. Visually check the speaker.
OK: The cone paper of the speaker is not torn.
If the result is not as specified, replace the No.2 speaker with box.
c. Speaker resistance check
1. Disconnect the front No.2 speaker with box connector.
2. Measure the resistance between the terminals of the speaker.
NOTE: The speaker should not be removed for checking.
If the result is not as specified, replace the No.2 speaker with box.
Rear Speaker
ON-VEHICLE INSPECTION
1. INSPECT REAR SPEAKER
HINT: Remove interior parts so that the rear speaker can be seen.
a. Check the speaker installation.
OK: The speaker is securely installed.
If the result is not as specified, reinstall the rear speaker.
b. Visually check the speaker.
