Sienna AWD V6-3.5L (2GR-FE) (2007)
/Page-1628004.png)
3.
REMOVE FRONT BUMPER COVER
4.
REMOVE REAR BUMPER COVER
5.
REMOVE NO.1 ULTRASONIC SENSOR RETAINER
a.
Remove the NO.1 ultrasonic sensor retainer as shown in the illustration.
6.
REMOVE NO.1 ULTRASONIC SENSOR
a.
Disconnect the connector and remove the NO.1 ultrasonic sensor.
INSTALLATION
1.
INSTALL NO.1 ULTRASONIC SENSOR
a.
Connect the connector and install the NO.1 ultrasonic sensor.
2.
INSTALL NO.1 ULTRASONIC SENSOR RETAINER
a.
Install the NO.1 ultrasonic sensor retainer.
3.
INSTALL REAR BUMPER COVER
