Sienna AWD V6-3.5L (2GR-FE) (2007)
a. Remove the 2 screws and console box assembly.
b. Using a moulding remover, disengage the 2 claws.
c. Disconnect the map light switch connector and sliding roof switch connector and remove the console box.
30. REMOVE ASSIST GRIP SUB-ASSEMBLY
a. Using a screwdriver, disengage the claw and remove the assist grip cover.
HINT: Tape the screwdriver tip before use.
b. Remove the torx, screw and assist grip sub-assembly.
31. REMOVE ROOF CONSOLE BOX
a. Remove the 2 torx screws, 2 screws and roof console box.
32. REMOVE AIR CONDITIONING NO.2 CONTROL ASSEMBLY