toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Body - Power Sliding Door Initialization Procedure|Page 8486 > < Power Seat Control Module|Locations|Page 8481
Page 1
background image

Power Sliding Door Module: Technical Service Bulletins
Body - Power Sliding Door Initialization Procedure

PRE-DELIVERY SERVICE
PD114-06

Title:
INITIALIZATION OF POWER SLIDING
DOOR DURING PDS

Models:
'07 Sienna

Introduction

As a result of the removal of the Short Pin, the "automatic open and close" and "jam protection" functions of the power sliding doors will be inoperative
due to loss of the power sliding doors position memory stored in the microcomputer.

Initialize the power sliding doors after installing the Short Pin in its original location during Pre-Delivery Service (PDS) at the dealership.

NOTE:

Any time the battery terminal has been disconnected, the power sliding doors MUST be re-initialized.

Applicable Vehicles

^

2007 model year Sienna vehicles.

Warranty Information

Body - Power Sliding Door Initialization Procedure|Page 8486 > < Power Seat Control Module|Locations|Page 8481