Sienna AWD V6-3.5L (2GR-FE) (2007)
12. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR
(a)
Disengage the 4 claws and remove the hood lock release lever protector.
13. REMOVE HOOD LOCK ASSEMBLY
(a)
With Hood Courtesy Switch:
(1) Disconnect the connector.
(b) Remove the 3 bolts.
(c)
Disconnect the cable and remove the hood lock assembly.
14. REMOVE HOOD LOCK SUPPORT SUB-ASSEMBLY
(a)
Disconnect the ambient temperature sensor connector.
(b) Detach the clamp.
(c)
Disconnect the low pitched horn and high pitched horn connectors.