Sienna AWD V6-3.5L (2GR-FE) (2007)
c. Remove the O-ring from the camshaft timing oil control valve.
13. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2 Intake Side)
a. Disconnect the camshaft timing oil control valve assembly connector.
b. Remove the bolt and camshaft timing oil control valve assembly.
c. Remove the O-ring from the camshaft timing oil control valve.
INSTALLATION
1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2 Exhaust Side)
a. Apply a light coat of engine oil to the new O-ring and install it to the camshaft timing oil control valve.
b. Install the camshaft timing oil control valve assembly with the bolt.
Torque: 10 Nm (102 kgf.cm, 7 ft. lbs.)
c. Connect the camshaft timing oil control valve assembly connector.
2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2 Intake Side)