Sienna AWD V6-3.5L (2GR-FE) (2007)
Exhaust Manifold: Specifications
Exhaust Manifold Sub-Assembly LH
Install the exhaust manifold sub-assembly LH with the 6 nuts in the order shown in the illustration.
Torque ............................................................................................................................................................................. 21 Nm (214 kgf-cm, 15 ft. lbs.)
Exhaust Manifold Sub-Assembly RH
Install the exhaust manifold sub-assembly RH with the 6 nuts in the order shown in the illustration.
Torque ............................................................................................................................................................................. 21 Nm (214 kgf-cm, 15 ft. lbs.)