Sienna AWD V6-3.5L (2GR-FE) (2007)
/Page-1424020.png)
a. Install the blower assembly.
b. Install the bolt, the 2 screws and the nut.
Torque: Bolt A 9.8 N.m (100 kgf.cm, 87 in.lbf)
c. Install the 2 clamps and 2 nuts and wire harness.
2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY WITH PASSENGER AIRBAG ASSEMBLY
Blower Unit (For Rear Air Conditioning System)