Sienna AWD V6-3.5L (2GR-FE) (2007)
Evaporator Temperature Sensor / Switch: Testing and Inspection
Evaporator Temperature Sensor
ON-VEHICLE INSPECTION
1. INSPECT A/C EVAPORATOR TEMPERATURE SENSOR
a. Remove the A/C evaporator temperature sensor (A/ C thermistor).
b. Disconnect the connector from the A/C evaporator temperature sensor (A/C thermistor).
c. Measure the resistance according to the value(s) in the table.
NOTE:
-
Even slightly touching the sensor may change the resistance value. Be sure to hold the connector of the sensor.
-
When measuring, the sensor temperature must be the same as the ambient temperature.