Sienna AWD V6-3.5L (2GR-FE) (2007)
/Page-1900002.png)
(b) Install the tire pressure warning ECU with the screw.
2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
HINT: Refer to the instructions for INSTALLATION of the instrument panel safety pad.
3. CONNECT CABLE TO BATTERY NEGATIVE TERMINAL
4. REGISTER TRANSMITTER ID
5. INSPECT TIRE PRESSURE WARNING SYSTEM
6. INITIALIZE SYSTEM
NOTICE:
^
Be sure to register the transmitter IDs of all tires in the ECU before initialization.
^
Be sure to inflate all tires to the proper inflation pressure before initialization.
