Sienna AWD V6-3.5L (2GR-FE) (2007)
NOTICE: Make sure that there is no clearance between the parts after tightening the oil filter cap.
(g) Apply a light coat of engine oil to a new O-ring and install it to the oil filter cap.
NOTICE: Remove all dirt and foreign matter from the installation surface.
(h) Install the oil filter drain plug to the oil filter cap.
Torque: 13 Nm (127 kgf-cm, 10 ft. lbs.)
NOTICE: Make sure that the O-ring does not get caught between the parts.
4. ADD ENGINE OIL
(a)
Add clean engine oil and install the oil filler cap.
Engine Oil
Capacity
5. INSPECT FOR OIL LEAK
(a)
Start the engine. Check for engine oil leaks from the connected parts of the oil filter cap and oil filter drain plug.