Sienna AWD V6-3.5L (2GR-FE) (2007)
Information Bus: Reading and Clearing Diagnostic Trouble Codes
With Manufacturer's Scan Tool
CHECK DTC
a. Prepare the intelligent tester.
b. Connect the intelligent tester to DLC3.
c. Turn the ignition switch to the ON position and turn the intelligent tester main switch ON.
d. Use the intelligent tester to check the DTCs, and note them down (For operating instructions, see the intelligent tester's instruction book.).
e. Refer to DIAGNOSTIC TROUBLE CODE CHART to confirm the details of the DTCs. See: Testing and Inspection/Diagnostic Trouble Code
Descriptions/Multiplex Communication System
Without Scan Tool
TOYOTA does not provide a procedure for Reading Trouble Codes Without Scan Tool.
With Manufacturer's Scan Tool
CLEAR DTC
a. DTC will be cleared when the malfunction output to DTC is recovered normally.
Without Scan Tool
TOYOTA does not provide a procedure for Clearing Trouble Codes Without Scan Tool.