Sienna AWD V6-3.5L (2GR-FE) (2007)
2. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a)
Jack up the vehicle.
(b) Disconnect the park/neutral position switch connector.
(c)
Measure the resistance according to the value(s) in the table when the shift lever is moved to each position.
Resistance
ADJUSTMENT
1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a)
Loosen the 2 bolts of the park/neutral position switch and move the shift lever to the N position.
(b) Align the groove with the neutral basic line.
(c)
Hold the switch in position and tighten the 2 bolts.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
(d) After adjustment, perform the inspection described in park/neutral position switch assembly operation.
INSTALLATION