Sienna AWD V6-3.5L (2GR-FE) (2007)
a. Apply a light coat of engine oil to the new O-ring and install it to the camshaft timing oil control valve.
b. Install the camshaft timing oil control valve assembly with the bolt.
Torque: 10 Nm (102 kgf.cm, 7 ft. lbs.)
Connect the camshaft timing oil control valve assembly connector.
3. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1 Exhaust Side)
a. Apply a light coat of engine oil to the new O-ring and install it to the camshaft timing oil control valve.
b. Install the camshaft timing oil control valve assembly with the bolt.
Torque: 10 Nm (102 kgf.cm, 7 ft. lbs.)
c. Connect the camshaft timing oil control valve assembly connector.