Sienna AWD V6-3.5L (2GR-FE) (2007)
2. Install the tank suction tube support to the fuel tank as shown in the illustration.
m. Put a mark on the fuel pump gauge retainer and the fuel tank with paint. This will be the evidence that the fuel pump gauge retainer has been
removed.
9. INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY
a. Install in the fuel return tube with the tube joint clip.
NOTE:
-
Check that there is no scratch or foreign objects on the connecting part.
-
Check that the fuel tube joint is inserted securely.
-
Check that the tube joint clip is on the collar of the fuel tube joint.
-
After installing the tube joint clip, check that the fuel tube joint has not been pulled off.
10. INSTALL FUEL TANK TO FILLER PIPE HOSE
INSTALLATION
1. INSTALL FUEL TANK ASSEMBLY
2. INSPECT FOR FUEL LEAK
3. INSTALL FUEL TANK FILLER HOSE COVER
4. INSTALL REAR FLOOR NO. 2 CROSSMEMBER BRACE LH
5. INSTALL CHARCOAL CANISTER PROTECTOR
a. Install the 6bots and the charcoal canister protector.
Torque: 5.0 Nm (51 kgf.cm, 44 in. lbs.)