Sienna AWD V6-3.5L (2GR-FE) (2007)
b. Connect the 2 knock control sensor connectors.
2. INSTALL INTAKE MANIFOLD
3. INSTALL FUEL MAIN TUBE SUB-ASSEMBLY
4. INSTALL INTAKE AIR SURGE TANK
NOTE: DO NOT apply oil to the bolts listed.
a. Install a new gasket to the intake air surge tank [A].
b. Using a 5 mm hexagon socket wrench, install the 4 bolts [B].
Torque: 18 Nm (184 kgf.cm, 13 ft. lbs.)
c. Install the intake air surge tank with the 2 nuts and 2 bolts [C].
Torque:
Nut16 Nm (163 kgf.cm, 12 ft. lbs.)
Bolt21 Nm (214 kgf.cm, 15 ft. lbs.)
d. Connect the connector [D].