Sienna AWD V6-3.5L (2GR-FE) (2007)
/Page-1209003.png)
3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY
4. REMOVE AIR CLEANER FILTER ELEMENT
5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY
6. REMOVE AIR CLEANER BRACKET
a. Remove the 2 bolts and the air cleaner bracket.
7. REMOVE NO.1 AIR CLEANER INLET
a. Remove the bolt and the NO.1 air cleaner inlet.
8. REMOVE STARTER ASSEMBLY
a. Disconnect the starter connector.
b. Open the terminal cap and remove the nut and the starter wire.
c. Remove the 2 bolts and the starter.
INSTALLATION
