Sienna AWD V6-3.5L (2GR-FE) (2007)
/Page-1210001.png)
Starter Motor: Overhaul
STARTER
DISASSEMBLY
1. REMOVE REPAIR SERVICE STARTER KIT
a. Remove the nut and disconnect the lead wire from the repair service starter kit.
b. Remove the 2 screws which are used to secure the repair service starter kit to the repair service starter kit.
c. Remove the repair service starter kit.
d. Remove the return spring and the plunger from the repair service starter kit.
2. REMOVE STARTER YOKE ASSEMBLY
a. Remove the 2 through bolts and pull out the starter yoke together with the starter commutator end frame.
