Sienna AWD V6-3.5L (2GR-FE) (2007)
b. Remove the starter yoke from the starter commutator end frame.
3. REMOVE STARTER ARMATURE PLATE
a. Remove the starter armature plate from the starter yoke.
4. REMOVE DRIVE HOUSING STARTER BEARING COVER
a. Using a screwdriver, remove the drive housing starter bearing cover.
5. REMOVE STARTER ARMATURE ASSEMBLY
a. Using snap ring pliers, remove the snap ring and plate washer.
b. Remove the starter armature from the commutator end frame.
6. REMOVE PLANETARY GEAR
a. Remove the 3 planetary gears from the repair service starter kit.
REASSEMBLY