Sienna AWD V6-3.5L (2GR-FE) (2007)
9. REMOVE STEERING RACK BOOT NO.1 CLAMP
HINT: Perform the same procedure on the other side.
10. REMOVE STEERING RACK BOOT NO.2
11. REMOVE STEERING RACK BOOT NO.1
12. REMOVE STEERING RACK END SUB-ASSEMBLY
(a)
Using a screwdriver and a hammer, unstake the claw washer.
NOTICE: Avoid any impact to the power steering rack.
(b) Using 2 SST, remove the 2 steering rack end sub-assembly and 2 claw washers.
SST 09922-10010
NOTICE:
^
Use SST 09922-10010 in the direction shown in the illustration.
^
Securely hold the power steering rack end with a SST.