Sienna AWD V6-3.5L (2GR-FE) (2007)
(n) Using SST, hold the control valve rotation and install a new lock nut.
SST 09616-00011
Torque: 25 Nm (250 kgf-cm, 18 ft. lbs.)
(o) Apply sealant to 2 or 3 threads of the rack housing cap.
Sealant: Toyota Genuine Adhesive 1344, Three Bond 1344, or equivalent
(p) Using a socket wrench (27 mm), install the rack housing cap.
Torque: 59 Nm (597 kgf-cm, 43 ft. lbs.)
(q) Using a punch and a hammer, stake the rack housing cap and rack housing.
9. INSTALL RACK GUIDE
(a)
Install the rack guide.
(b) Install the compression spring.
(c)
Apply sealant to 2 or 3 threads of the rack guide spring cap.
Sealant: Toyota Genuine Adhesive 1344, Three Bond 1344, or equivalent
(d) Temporarily install the rack guide spring cap.