Sienna AWD V6-3.5L (2GR-FE) (2007)
/Page-1321003.png)
(c)
Install the 2 bolts on the front side of the front suspension arm sub-assembly lower No.1 LH.
Torque: 200 Nm (2,040 kgf-cm, 148 ft. lbs.)
2. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR
(a)
Install the transverse engine engine mounting insulator with the 3 nuts.
Torque: 87 Nm (887 kgf-cm, 64 ft. lbs.)
3. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE
