Sienna AWD V6-3.5L (2GR-FE) (2007)
outer front.
(a)
Disconnect the wire harness from the cowl top panel sub-assembly outer front.
(b) Remove the 9 bolts, cowl top brace and cowl top panel sub-assembly outer front.
8. REMOVE FRONT STABILIZER LINK ASSEMBLY LH
(a)
Remove the nut and disconnect the front stabilizer link assembly LH from the shock absorber assembly front LH.
HINT: If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.
9. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING
(a)
Loosen the lock nut.
NOTICE:
^
Do not loosen the nut except for the purpose of disassembling the shock absorber assembly front LH with coil spring.
^
Do not remove the lock nut.