Sienna AWD V6-3.5L (2GR-FE) (2007)
(c)
Install the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)
6. CONNECT REAR BRAKE TUBE NO.1
SST 09023-00101
HINT: Connect the RH side by the same procedures as the LH side.
7. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.3
(a)
Install the 2 bolts and parking brake cable assembly No.3 to the rear axle beam assembly.
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)
8. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.2
HINT: Install the RH side by same procedures as the LH side.
9. INSTALL DIFFERENTIAL CARRIER ASSEMBLY REAR (for 4WD)
10. INSTALL REAR DRIVE SHAFT ASSEMBLY LH (for 4WD)
(a)
Install the rear drive shaft assembly LH, 4 washers and 4 nuts.