Sienna AWD V6-3.5L (2GR-FE) (2007)
(b) Support the rear axle beam assembly with a jack.
(c)
Install the rear shock absorber assembly rear LH, cushion retainer and nut to the rear axle beam.
(d) Install the rear shock absorber cushion No.1 and rear shock absorber LH cushion retainer.
(e)
Temporary tighten a new lock nut.
(f)
Using a 6 mm hexagon wrench to hold the piston rod, fully tighten the lock nut.
Torque: 30 Nm (310 kgf-cm, 22 ft. lbs.)