Sienna AWD V6-3.5L (2GR-FE) (2007)
/Page-1034003.png)
5. DISCONNECT TRANSMISSION WIRE
(a)
Disconnect the 7 shift solenoid valve connectors.
(b) Remove the bolt and lock plate, and disconnect the ATF temperature sensor.
6. REMOVE TRANSMISSION WIRE
(a)
Disconnect the transmission wire connector.
(b) Remove the bolt and transmission wire.
(c)
Remove the O-ring from the transmission wire.
INSTALLATION
1. INSTALL TRANSMISSION WIRE
(a)
Coat the O-ring of the transmission wire connector with ATF and install it.
(b) Install the transmission wire with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 ft. lbs.)
