Sienna AWD V6-3.5L (2GR-FE) (2007)
(b) Install the speed sensor with the bolt.
Torque: 11 Nm (115 kgf-cm, 8 ft. lbs.)
HINT: Make sure to install the same manufacturer's sensor.
(c)
Connect the speed sensor connector.
2. INSTALL SPEED SENSOR (NT SENSOR)
(a)
Coat the O-ring with ATF.
(b) Install the speed sensor with the bolt.
Torque: 11 Nm (115 kgf-cm, 8 ft. lbs.)
HINT: Make sure to install the same manufacturer's sensor.
(c)
Connect the speed sensor connector.
3. INSTALL AIR CLEANER ASSEMBLY
4. INSTALL BATTERY