Sienna AWD V6-3.5L (2GR-FE) (2007)
D. Remove the 3 screws and switch from the armrest base panel upper.
4. Remove the front door trim board sub-assembly.
A. Remove the 3 screws and back frame plate.
B. Remove the 2 cushion rubbers.
C. Remove the 2 screws and clip A.
D. Using the plastic pry tool disengage the 9 remaining clips.
E. Remove the trim board by pulling upward.
F. Disconnect the 2 cables from the inside handle as shown in the illustration.