Sienna AWD V6-3.5L (2GR-FE) (2007)
/Page-2047003.png)
2. Remove the front door inside handle bezel plug.
Using the plastic pry tool, disengage the 3 claws and remove the bezel.
3. Remove the power window regulator master switch assembly.
A. Remove the screw.
B. Using the plastic pry tool disengage the clip and claw then remove the armrest base panel upper together with the switch.
C. Disconnect the connector.
D. Remove the 3 screws and switch from the armrest base panel upper.
