Sienna AWD V6-3.5L (2GR-FE) (2007)
/Page-2050004.png)
a. Coat the installation part of the stoppers with Primer G.
NOTICE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not keep any of the opened Primer G for later use.
-
Do not apply too much Primer.
b. Install 2 new stoppers onto the glass, as shown in the illustration.
2. INSTALL WINDSHIELD GLASS NO.1 STOPPER
a. Install 2 new stoppers to the vehicle body, as shown in the illustration.
3. INSTALL WINDOW GLASS ADHESIVE DAM
a. Coat the installation part of the windshield glass adhesive dam with Primer G.
NOTICE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not apply too much Primer.
b. Install a new dam, applying double-sided tape all the way around the glass except where the stoppers are installed, as shown in the illustration.
