Sienna AWD V6-3.5L (2GR-FE) (2007)
/Page-2050008.png)
2. Load the sealer gun with the cartridge.
3. Coat the glass with adhesive, as shown in the illustration.
f.
Install the glass.
1. Using a suction cup, position the glass so that the reference marks are aligned. Press it in gently along the rim.
NOTICE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Check that the stoppers are attached to the vehicle body correctly.
-
Check that clearance between the vehicle body and glass.
2. Lightly press the front surface of the glass to ensure a close fit.
3. Using a scraper, remove any excess or protruding adhesive.
HINT: Apply adhesive on the glass rim.
