Sienna FWD V6-3.5L (2GR-FE) (2009)
/Page-1890002.png)
OK -- REPAIR OR REPLACE HARNESS OR CONNECTOR
NG -- Continue to next step.
3. CHECK HARNESS AND CONNECTOR (INSTRUMENT PANEL J/B ASSEMBLY - BODY GROUND)
(a) Disconnect the 1K and 1L J/B connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE INSTRUMENT PANEL J/B ASSEMBLY
