Sienna FWD V6-3.5L (2GR-FE) (2009)
1. For ALL 2004 - 2010 model year Sienna vehicles remove and replace the male door stoppers (2 per door opening). The male stoppers are secured to
the B-Pillars with 2 bolts.
Torque:
Male Stopper: 5.5 N*m (56 kgf*cm, 49 in*lbf)
Technical Service Bulletin # SB0094-10
Date: 100316
Body - Sliding Door(s) Rattle While Driving
T-SB-0094-10
March 16, 2010
Sliding Door Rattle While Driving
Service Category
Vehicle Exterior
Section
Door/Hatch
Market
USA
Applicability
TSB SUPERSESSION NOTICE
The information contained in this TSB supersedes TSB No. NV001-06.
^
Applicability has been updated to include 2007 - 2010 model year Sienna vehicles.
^
Repair Procedure 3 has been added for replacement of slide door male stoppers.
TSB No. NV001-06 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before
proceeding.
Introduction