Sienna FWD V6-3.5L (2GR-FE) (2009)
Trunk / Liftgate Lock: Testing and Inspection
DOOR LOCK: BACK DOOR LOCK: INSPECTION
INSPECTION
1. INSPECT BACK DOOR LOCK ASSEMBLY (W/O CLOSER)
(a) Check operation of the door lock.
(1) Using a screwdriver, push the latch in order to put the back door lock in the locked condition (full-latch position).
(2) Connect the battery positive (+) lead to terminal 3 and the battery negative (-) lead to terminal 1. Then, check operation of the latch.
Standard:
The latch turns to the open-latch position
If operation is not as specified, replace the door lock assembly.
(b) Check the back door courtesy switch resistance.
(1) Check the resistance between the terminals of the courtesy switch.
Standard resistance:
If the result is not as specified, replace the door lock assembly.
2. INSPECT BACK DOOR LOCK ASSEMBLY (W/ CLOSER)
(a) Check operation of the door lock.