Sienna FWD V6-3.5L (2GR-FE) (2009)
Trunk / Liftgate Switch: Testing and Inspection
Power Back Door Main Switch
ENGINE HOOD / DOOR: POWER BACK DOOR MAIN SWITCH: INSPECTION
INSPECTION
1. INSPECT POWER BACK DOOR MAIN SWITCH
(a) Inspect the resistance of the main switch.
Resistance:
If the result is not as specified, replace the switch.
(b) Apply battery voltage and check the illuminates.
OK:
HINT: Whether the switch illuminates or not will not affect the function of the LH side.
If the result is not as specified, replace the bulb.