Sienna FWD V6-3.5L (2GR-FE) (2009)
/Page-1983006.png)
(a) Using a screwdriver, disengage the 2 claws and remove the visor cover.
HINT: Tape the screwdriver tip before use.
(b) Remove the 3 screws and visor.
27. REMOVE LH VISOR ASSEMBLY
28. REMOVE VISOR HOLDER
(a) Remove the screw and visor holder.
29. REMOVE ROOF CONSOLE BOX ASSEMBLY
(a) Remove the 2 screws and console box assembly.
(b) Using a moulding remover, disengage the 2 claws.
(c) Disconnect the map light switch connector and sliding roof switch connector and remove the console box.
30. REMOVE ASSIST GRIP SUB-ASSEMBLY
(a) Using a screwdriver, disengage the claw and remove the assist grip cover.
HINT: Tape the screwdriver tip before use.
